【概况】

【教育背景】

2012.09-2016.06天津大学 机械工程 博士 2010.09-2012.06 天津大学 机械工程 硕士 2006.09-2010.06 华南理工大学 机械制造及其自动化 学士

【学术经历】

2022.03-至今：天津大学，机械工程学院，副教授 2018.11-2022.03：天津大学，机械工程学院，讲师 2016.10-2018.10：University of Warwick，博士后（国家博士后交流计划派出项目）

【讲授课程】

《设计与制造技术基础3B》

【教学成果】

【研究方向】

复合材料加工及连接装配技术、连续纤维复合材料增材制造、复合材料数字化建模与仿真

【学术兼职】

【科研项目及成果】

[1] 机理与数据融合的热塑性复材切削表面完整性建模及服役性能预测方法，国家自然基金(面上)，2024.01-2027.12 [2] CFRP制孔表面质量表征及其对连接强度性能影响机理研究，国家自然基金(青年)，2018.01-2020.12 [3] CFRP激光加工热影响区形成机理及其对材料服役性能影响规律，天津市基金(面上)，2019.04-2022.03 [4] XXXXXX服役过程数字化建模仿真，航天精工股份有限公司，2021.07-2025.12 [5] XXXXXX加工技术研究，天津航天长征火箭制造有限公司，2021.08-2022.05 [6] 面向汽车轻量化的结构成型与性能测试，中国汽车技术研究中心有限公司，2021.08-2025.08 [7] 基于混联机器人航空复材加工关键技术研究，国家重点研发计划国际合作，2018.04-2021.03，参与 [8] 航空叠层构件柔性制孔工艺装备技术基础，国家自然基金国合重点项目，2018.01-2021.12，参与 [9] European and Chinese Platform for Stacked Aero-Structure Drilling Process and Equipment, EU-H2020, 2016.10-2018.10, 参与

【代表性论著】

[1] S Li, S Zhang, H Li*, et al., Numerical and experimental investigation of fitting tolerance effects on bearing strength of CFRP/Al single-lap blind riveted joints, Composite Structures, 2022 [2] H Li, Y Zhu, X Ming, et al., Effect of laser generated microgrooves geometric parameters on the shear strength of CFRP-Aluminium alloy adhesive joints, The Journal of Adhesion, 2022 [3] X Cao, X Qin, H Li*, et al., Non-ordinary state-based peridynamic fatigue modelling of composite laminates with arbitrary fibre orientation, Theoretical and Applied Fracture Mechanics, 2022 [4] X Qin, Z Bao, W Zhou, H Li*, et al., Surface quality evaluation for CFRP milling and its impact on the mechanical properties, The International Journal of Advanced Manufacturing Technology, 2022 [5] H Li, H Liu, S Li, et al., Influence of high pulse fluence infrared laser surface pretreatment parameters on the mechanical properties of CFRP/aluminium alloy adhesive joints, The Journal of Adhesion, 2022 [6] X Qin, X Cao, H Li*, et al., Effects of countersunk hole geometry errors on the fatigue performance of CFRP bolted joints, Proc IMechE Part B: J Engineering Manufacture, 2022 [7] X Qin, X Wu, H Li*, et al., Numerical and experimental investigation of orthogonal cutting of carbon fiber‑reinforced polyetheretherketone (CF/PEEK), International Journal of Advanced Manufacturing Technology, 2021 [8] Y Zhang, H Li*, X Qin, et al., Analysis of vibration response and machining quality of hybrid robot based UD-CFRP trimming, Proc IMechE Part B: J Engineering Manufacture, 2021 [9] M Shi, X Qin, H Li*, et al., Cutting force and chatter stability analysis for PKM-based helical milling operation, International Journal of Advanced Manufacturing Technology, 2020 [10] H Li, Q Xu, S Wen, et al., Deformation analysis and hole diameter error compensation for hybrid robot based helical milling, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2019 [11] S Shang, X Qin, H Li*, et al., An application of non-ordinary state-based peridynamics theory in cutting process modelling of unidirectional carbon fiber reinforced polymer material, Composite Structures, 2019 [12] H Li, X Qin, T Huang, et al., Machining quality and cutting force signal analysis in UD-CFRP milling under different fiber orientation, International Journal of Advanced Manufacturing Technology, 2018 [13] H Li, X Qin, G He, et al., An energy based force prediction method for UD-CFRP orthogonal machining, Composite Structures, 2017 [14] H Li, X Qin, G He, et al., Investigation of chip formation and fracture toughness in orthogonal cutting of UD-CFRP, International Journal of Advanced Manufacturing Technology, 2016